Finish Clean Floors With a Polish.

Step 3: Unclog and Clean the Vacuum’s Hose.A clogged hose doesn’t just reduce your vacuum’s suction.

It can also put extra strain on the motor and cause a bad odour during vacuuming.. We’ve written a full guide on.how to clean a vacuum hose., but here’s an overview of best way to clean your hose:.

Remove the hose and inspect either end for visible blockages..Check for internal blockages by squeezing along the hose.

If you find one, gently bend around the clump to loosen it.. Push a thin broom handle through the hose to dislodge any blockages.

Don’t use too much force.. Rinse the inside of the hose with cold water, then fill the sink with a few inches of water and washing up liquid.Fortunately, this is a simple process!.

Start by turning the vacuum onto its side, then press the grey button.You should now be able to twist the main cylinder to unlock it.. Once the cylinder has been unlocked, you’ll be able to pull it away from the rest of the vacuum.

Don’t force it – the cylinder should come away easily if you’ve unlocked it correctly..The filter is located in the middle of the cylinder.